Description
This harness allows a 04 USDM (JDM 14 pin), or 05-07 USDM ( JDM 16 pin) sweep at start up STi clusters to fully Plug and Play into any non STI 02-07 GD car. No cutting any wires, no popping out/ moving pins. Will also have working Outside temp display (OE sensor required if the cars current cluster does not have an outside temp display).
Will not have the any of the following issues that you could normally have if you just plugged a 04-07 STi cluster in: Buzzing sound, Brake indicator on all the time, ABS indicator on (flipped signal), radio fuse blowing and cruise light not working.
If your going to use this harness with a jdm 14 pin cluster please contact us with the part number on the back of the cluster, so we can get the abs polarity figured out correctly.
Options:
OAT/ HVAC Type. This determines what is needed to get the OAT (outside ambient temp) display in the STI cluster to work properly.
If your stock cluster does not have an OAT display your car does not have the sensor, select “No OAT+Manual HVAC” and you’ll need to ether add the sensor to your order or get one from the dealer.
If your stock cluster has an OAT display and your car has manual HVAC, select “OAT+Manual HVAC”
If your stock cluster has an OAT display and your car has auto HVAC, select “OAT+Auto HVAC”
DCCD wiring ($20) .7 3 ft long wires for connecting to an aftermarket dccd controller like the DCCDPro or MapDCCD.
Rear Diff sensor input. R.Diff wire 3 ft long, to connect to a STi rear diff temperature sensor or grounded inside the harness to keep the light off.
Reviews
There are no reviews yet.